LV5507 Amplifier Specifications
APPLICATION
The LV 5507 is a versatile amplifier that can be operated as two independent channels or combined for maximum voltage in Bridge-mono mode. It is intended for use in low voltage, high impedance applications.

FEATURES
> Front panel indicators for rapid assessment of amplifier status.
> Input/output comparator assures precision signal accuracy
> Operates on voltages of 100 to 240 VAC, 50 or 60 HZ
> Protection circuitry and devices guard against damage from improper loads
> Installs easily into a standard 19-inch rack, or stands alone for bench top operation
> Backed with AE Techron’s application engineering, service facilities, technical support and one year warranty
INDICATORS AND CONTROLS
> Front panel volume controls
> Rotary “On/Off” switch
> LEDs indicate signal presence and signal clip
> Front panel phone jack for signal monitoring
> Rear panel switch for dual channel or bridge –mono operation
PERFORMANCE (One hour continuous ratings)
Frequency response
. 20 Hz to 20 kHz
Phase response
+10/-15 Degrees (20 Hz to 20 kHz at 1 watt)
Signal-to-noise ratio
106 dB gain below rated output (20 Hz to 20 kHz
THD + Noise
Less than 0.001%
Output impedance
Less than 15 milliohms in series with less than 3 micro henries
Input Impedance
20.0k ohm balanced, 10k ohms unbalanced
OUTPUT POWER
Measurements taken at 1 kHz at .05% THD with amplifiers operating in controlled voltage mode.
One Channel Driven
40mSec Burst
1 Hour Continuous
Ohms
Watts
Volts
Amps
Watts
Volts
Amps
4
65
16
4
55
15
3.7
8
45
19
2.5
40
18
2.2
Two Channel Bridged to Mono
40mSec Burst
1 Hour Continuous
Ohms
Watts
Volts
Amps
Watts
Volts
Amps
8
140
33
4.2
110
30
3.7
16
90
38
2.5
80
36
2.2
PHYSICAL CHARACTERISTICS
Chassis: The Amplifier is designed for stand alone, or rack mounted, operation. The Chassis is black steel with a silver front panel. The unit occupies one EIA 19-inch-wide unit.
Weight: 10 lbs. (22 kg)
AC Power: Single phase, 100 to 240V, 50 –60 Hz, 15 amp service (voltage selectable internally).
Cooling: Forced air cooling from the front, through removable filters, to side panels.
Dimensions: 19 in. x 18.5 in. x 3.5 in (48.3 cm x 47.0 cm x 6.4 cm)

SUPPORT
When you purchase an AE Techron amplifier, a full complement of technical and factory support personnel join your team. AE Techron provides:
> Applications engineering for your technical questions and customizedproduct needs.
> A one year limited warranty to protect your equipment investment.
> A fully equipped service center to keep your amplifier operating at original performance requirements.
Copyright AE Techron, Inc. 2007 Report site problems to the webmaster.