8200 SERIES

8210 - The 8210 single-channel gradient amplifier is the next-generation 160-volt, 100-amp solution for small-bore MRI and NMR applications.Compared to other gradient amplifiers in this power range, the 8210 offers faster slew rates, the lowest DC-100 kHz noise floor and the highest switching/ripple frequencies available. It is also the smallest and lightest gradient amplifier/power supply combination available. It has a DC-100 kHz RMS noise floor of 0.1 mA.The 8210 requires only 120VAC/20A or 230VAC/10A single-phase power and does not require a controlled environment. It features a programmable compensation system that provides quick and easy adjustment of the built-in RC networks.

8205 - The 8205 two-channel gradient amplifier is the next-generation 160-volt, 50-amp solution for small-bore MRI and NMR applications. Compared to other gradient amplifiers in this power range, the 8205 offers faster slew rates, the lowest DC-100 kHz noise floor and the highest switching/ripple frequencies available. It is also the smallest and lightest gradient amplifier/power supply combination available. It has a DC-100 kHz RMS noise floor of 0.1 mA.The 8205 requires only 120VAC/20A or 230VAC/10A single-phase power and does not require a controlled environment. It features a programmable compensation system that provides quick and easy adjustment of the built-in RC networks.

7000 SERIES

7796 - The 7796 power amplifier offers up to 200 Ap power, DC - 100 kHz bandwidth, and controlled-current or controlled-voltage modes of operation. The 7796 works best into loads of 2 ohms or less. For greater voltage or current (up to 800 Ap) units can be combined in parallel or series. Typically used as a gradient amplifier in small bore, high gain MRI systems of up to 200 Ap per axis and to reproduce waveforms found in EMC standards like MIL STD 1275, MIL STD 461, DO160, and ATIS-0600315.2007.

7782 - The 7782 power amplifier offers up to 150 Ap power, DC - 50 kHz bandwidth, and controlled-current or controlled-voltage modes of operation. The 7782 is the original member of the 7000 series, offered now as a remanufactured product; it offers a balance of great value, reliability and strong performance. The 7782 works best into loads of 2 ohms or less. For greater voltage or current, units can be combined in parallel or series. Typically used as a gradient amplifier in small bore, high gain MRI systems of up to 150 Ap per axis and to reproduce waveforms found in EMC standards like MIL STD 1275, MIL STD 461, DO160, and ATIS-0600315.2007.

7782HF - The 7782HF is an extended frequency verison of the 7782. The 7782HF is best suited for controlled voltage applications that require higher voltages between 50kHz - 100kHz. The 7782HF is ideal for situations like DO-160 testing that require high current from DC - 20kHz and DC - 150kHz power bandwidth.

7548 - The 7548 power amplifier offers up to 100 Ap power, DC - 100 kHz bandwidth, controlled current or controlled voltage modes of Operation, in a compact 5U size. The 7548 works best with loads of 2 ohms or more. For greater voltage (up to 750Vp) or current, units can be combined in series or parallel. Typically used as a gradient amplifier in small bore, high gain MRI systems of up to 100 Ap per axis and to reproduce waveforms found in EMC standards like MIL 704.

7224 - The 7224 power amplifier offers the power and features of larger industrial amplifiers in a new smaller 2U size that runs from single phase 120/230VAC. It features DC - 300 kHz bandwidth, controlled current or controlled voltage modes of operation and has a wide range of field configurable options. The 7224 is typically used to create waveforms found in EMC standards like CS2009, DO-160, MIL STD 461, and as a gradient amplifier for very small bore, high-gain MRI and NMR systems.

 

RLY SERIES

7796RLY - The 77968RLY is a single channel, current source, power amplifier that can be used in combination with test sets or in conjunction with digital real time power system network simulators, (like RTDS). The 7796RLY amplifier can be combined to form three phase systems for testing of Protection Relays, it offers up to 200 Ap power, and DC - 10 kHz bandwidth.

7780RLY - The 7780RLY is a single channel, current source, power amplifier that can be used in combination with test sets or in conjunction with digital real time power system network simulators, (like RTDS). The 7780RLY amplifier can be combined to form three phase systems for testing of Protection Relays, it offers up to 150 Ap power, and DC - 10 kHz bandwidth.

7548RLY - The 7548RLY is a single channel, current source, power amplifier that can be used in combination with test sets or in conjunction with digital real time power system network simulators, (like RTDS). The 7548RLY amplifier can be combined to form three phase systems for testing of Protection Relays, it offers up to 100 Ap power, DC - 10 kHz bandwidth, all in a compact 5U size.

LV SERIES

LV3620 - The LV 3620 is a two channel linear amplifier, specifically designed to drive high impedance loads at high voltage levels. The LV 3620 features ground referenced inputs and outputs that allow three channels of two LV 3620 amplifiers to be connected in a wye configuration with common neutral for power utility or related applications. The LV 3620’s versatility makes it useful in industrial and commercial power applications including power system modeling, shaker tables, low frequency building resonators. The LV 3620’s low distortion level makes it ideal for drive actuators, servos and other positioning units.

LV3622 - The LV 3622 is a single channel linear amplifier, specifically designed to drive high impedance loads at high voltage levels. The LV 3622 features isolated inputs and outputs that allow three LV 3622 amplifiers to be connected in a wye configuration with common neutral for power utility or related applications. The LV 3622’s versatility makes it useful in industrial and commercial power applications including power system modeling, shaker tables, low frequency building resonators. The LV 3622’s low distortion level makes it ideal for drive actuators, servos and other positioning units. AE Techron’s LV 3622 is also used to supply clean power for processes, drive transducers and simulate Europe’s 50 Hz power sources.

DV1.0

DV1.0 - The DV1.0 is a controlled voltage amplifier that is available in two configurations; as a two channel AC-Coupled, or as a DC-Coupled, single-channel amplifier. The DV1.0 is a Switch Mode amplifier and is ideal for reactive loads or where high power, small size and light weight are critical factors in product selection. The DV 1.0 is unique in that it is both switch mode and capable of full power at frequencies up to 18kHz. The DV1.0 is well suited to both pulse and continuous duty applications into load impedances above 2 ohms.