AE Techron Rental Partner
Advanced Test Equipment Corp. is the exclusive world-wide Rental Partner for AE Techron. ATEC equips customers with everything from the latest technology to legacy equipment, for applications ranging from everyday use to unique and industry specific applications. As an A2LA ISO 17025 accredited calibration company, ATEC provides products for a variety of industries, including automotive, aerospace, calibration, communications, consumer electronics, defense, EMC, environmental health & safety, and NDT inspection. As a leading provider of test and measurement equipment, ATEC has established solid relationships with industry-leading manufacturers worldwide to provide the most cutting-edge rental products.
Advanced Test Equipment Corp.
10401 Roselle Street
San Diego, CA 92121
U.S. and Canada: 1-800-404-ATEC (2832)
Int'l: 001 800 0404 2832
Direct: 1-858-558-6500
Fax: 1-858-558-6570
Email: emc_team@atecorp.com
Web: www.atecorp.com
AE Techron Equipment Available for Rental
7796 Power Amplifier | DC-30 kHz | 6600W
The AE Techron 7796 amplifier is a high-powered, DC-enabled unit designed to provide clean, reliable power for gradient coils in magnetic resonance imaging systems or in applications that require both significant short-term . . .
SKU: AETE-7796
7796HC Power Amplifier | DC-30 kHz | 6600W
The AE Techron 7796HC amplifier is a high-powered, DC-enabled unit designed to provide clean, reliable power for gradient coils in magnetic resonance imaging systems or in applications that require both significant short-term . . .
SKU: AETE-7796-HC
7794 Power Amplifier | DC-100 kHz | 200Ap
The AE Techron 7794 4-Quadrant Power Amplifier is a powerful four-quadrant amplifier that offers up to 200 Ap power, DC - 100 kHz bandwidth, and controlled-current or controlled-voltage modes of operation. The AE Techron. . .
SKU: AETE-7794
7548 Audio Power Amplifier | DC-200 kHz | 3.3 kW
The AE Techron 7548 Audio Power Amplifier is a DC-enabled and high-power device. With a power response of DC to 200 kHz, a maximum continuous output power of 3300 watts RMS, and an input power of 208 VAC / 3ph, the AE Techron . . .
SKU: AETE-7548
7224 Linear Power Amplifier | DC-300 kHz | 900VA
The AE Techron 7224 Power Amplifier generates 900VA RMS of energy for high-power applications to 40kHz, with a small signal bandwidth of 20Vp-p to 300 kHz and 16A of DC power at 13.5 VDC. A single 7224 can output a 40ms pulse . . .
SKU: AETE-7224
7228 Linear Power Amplifier | 100 kHz -1 MHz | 1000W
The AE Techron 7228 Linear Power Amplifier produces 1000W RMS model AC power up to 20kHz, and for high-power applications, up to 100kHz. This model operates at a small signal bandwith of 8Vp-p to 1MHz and outputs 16A of DC . . .
SKU: AETE-7228
7234 Linear Power Amplifier | DC-1 MHz | 158Vp
The AE Techron 7234 Liner Power Amplifier is a single-phase amplifier and battery simulator with an RMS power output of 900 W. This rugged and user-friendly audio power amplifier is the ideal device for a variety of testing . . .
SKU: AETE-7234
8302 Switch-Mode Amplifier | DC-50kHz | 200Vp
AE Techron’s 8300 Series amplifiers are 200Vp, low-noise, DC-to-50 kHz switch-mode amplifiers. The 8300 Series provides a unique combination of the advantages of switch-mode and linear amplifiers. Switch-mode efficiency is combined with a low noise floor and THD, while also benefitting from high slew rates and wide bandwidth . . .
SKU: AETE-8302
8500 Series Switch-Mode Amplifiers | DC-50kHz | 400Vp
AE Techron’s 8500 Series amplifiers are 400Vp, low-noise, DC-to-50 kHz switch-mode amplifiers. The 8500 Series provides a unique combination of the advantages of switch-mode and linear amplifiers. Switch-mode efficiency is combined with a low noise floor and THD, while also benefitting from high slew rates and wide bandwidth . . .
SKU: AETE-8500
8704 Switch-Mode Amplifier | DC-250kHz | 400Vp
AE Techron’s 8700 Series amplifiers are 400Vp, low-noise, DC-to-250 kHz switch-mode amplifiers. The 8700 Series provides a unique combination of the advantages of switch-mode and linear amplifiers. Switch-mode efficiency is combined with a low noise floor and THD, while also benefitting from high slew rates and wide bandwidth . . .
SKU: AETE-8704
9100 Series Switch-Mode Amplifiers | DC-250kHz | 200Vp
The AE Techron 9100 Amplifier Series is made up of three units of wide-bandwidth, high-power amplifiers, including the 9105, the 9110, and the 9115. Each unit has multiple operating modes and a typical power factor of 0.98 . . .
SKU: AETE-9100-SERIES
3110A Standards Waveform Generator
The AE Techron 3110A is a standards waveform generator which generates ripple wave forms of up to 300 kHz and equips technicians with a vast library of automotive and aviation test standards, holding a max capacity of 300 . . .
SKU: AETE-3110
CIS-25 Conducted/Induced Susceptibility Test System
The AE Techron CIS-25 is an EMC testing kit which includes three coupling transformers: the T1000, the T2000, and the T3700. This kit also comes with an EMC test system, a chattering relay, and secure storage. Ideal for . . .
SKU: AETE-CIS-25
T1000 Magnetic-Field Susceptibility Transformer
The T1000 Magnetic-Field Susceptibility Transformer was designed to exceed the AF Magnetic Field susceptibility test requirements of DO 160 Section 19 and Boeing D6-16050 Section 7.2.2. It may also be used as a 10-to-1 step . . .
SKU: AETE-T1000
T2000 Low-Frequency Conducted Susceptibility Transformer
The T2000 Audio-Bandwidth Conducted Susceptibility Transformer was designed to meet or exceed the LF conducted susceptibility test requirements of DO 160 Section 18. The T2000 is used to apply the required test signals to the . . .
SKU: AETE-T2000
T3700 Electric-Field Susceptibility Transformer
The T3700 Electric-Field Susceptibility Transformer was designed to meet or exceed the voltage requirements of DO 160 Section 19 and Boeing D6-16050 Section 7.2 testing. It may also be used as a 1-to-37 step-up transformer for . . .
SKU: AETE-T3700
Advantages of Test Equipment Rentals:
- Provides cost-effective solutions for short-term projects or overload
- Saves time and money with immediate delivery
- Provides the ability to evaluate equipment before purchasing
- Avoids wasting time and money on maintenance costs
- Provides a "plan-B" when allocated equipment fails
The ATEC Assurance Program consists of a 20-Point Inspection Process, which ensures you the peace-of-mind that the equipment you rent will operate as specified, includes all ordered accessories, customer and technical support is provided, and equipment requiring calibration is within spec. ATEC Assurance ensures every rental order gets the attention it deserves and is treated with the utmost care.
Please be aware that Advanced Test Equipment Rentals (ATEC) is an independent business and sets their own prices, terms and conditions of sale. AE Techron makes no representations or warranties, express or implied, about Advanced Test Equipment Rentals (ATEC), or the prices, terms and conditions of sale agreed upon by you and them.
Want to discuss a product or application?
Your local AE Techron Representative can help find the right system for your needs.
We're the audio-bandwidth experts.